New Settings for Transponder Changes

1. When making changes to the settings in the B2C2 software you must first double click on the green satellite signal icon located in your task bar in the lower right hand corner of you desktop.

        

2. The following screen should appear:

        

3. Click on the Transponder Management button. The following screen should appear:

   

4. Select 12060 MHz : H/L in the Transponder box.

5. Click on the Edit button.

6. The following screen should appear which the only changes will be made to the
   Symbol Rate.

   

7. The default setting for the Symbol Rate is set to 13022, as shown above.

8. You will need to change the Symbol Rate to 6667, as shown below.

   

9. Once these changes are made click ok and your settings will be properly set.